Care And Maintenance; Compact Disc Care; Cleaning The Unit; Specifications - Sanyo DTA-1800 Instruction Manual

DTA-1800-Efinal 9/30/02
CARE & MAINTENANCE

COMPACT DISC CARE

• Treat the disc care f u l l y. Handle the disc only by its edges. Never allow your fingers to come in contact with the
s h i n y, unprinted side of the disc.
• Treat the disc care f u l l y. Handle the disc only by its edges. Never allow your fingers to come in contact with the
s h i n y, unprinted side of the disc.• To remove a disc from its storage case, press down on the center of the case
and lift it out, holding it carefully by the edges.
• Do not attach adhesive tape, stickers etc., to the disc label.
• Clean the disc periodically with a soft, lint-free, dry cloth.
• Never use detergents or adhesive cleaners to clean the disc.
• When cleaning the disc, wipe in straight lines from the center of the disc to the edge. Never wipe in a circular motion.
• Unlike conventional re c o rds, compact discs have no grooves to collect dust and microscopic debris, so gently
wiping with a soft cloth should remove most part i c l e s .
• If necessary, use a CD cleaning kit.
• If the disc skips or is stuck on a track, it is probably dirty or damaged (scratched).

CLEANING THE UNIT

• To prevent fire or shock hazards, disconnect your unit from the AC power source when cleaning.
• If the cabinet becomes dusty, wipe it with a soft, dry dust cloth. Do not use any wax or polish sprays on the
cabinet.
• Use caution when cleaning and wiping the plastic part s .
• If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth, slightly dampened
with a mild soap and water solution. Never use abrasive cloths or polishes, as these will mar the finish of your unit.
C a u t i o n : never allow any water or other liquids to enter the unit while cleaning.

SPECIFICATIONS

Power supply
AC Adapter
Power output
Radio Section
CD Section
S p e a k e r s
Remote Contro l
D i m e n s i o n s
11:55 AM Page 19
DC 12 V
AC 120 V, 60 Hz
DC 3 V (1.5V x 2 AA batteries for tuner and clock memory )
4.5W/CH, 10% THD
Tuning: PLL with 32 p resets (FM 20, AM 12)
F req. Range: AM 520 - 1710 kHz
FM 87.5 - 107.9 MHz
F ront vertical loading
3.5", 3.2 ohms
2 8 - k e y, Battery: CR2032 (supplied)
454 x 96 x 200 mm (main unit)
1 9