Am/Fm Tuner; Listening To The Radio; Storing Preset Stations; Recalling Preset Station - Sanyo DTA-1800 Instruction Manual

DTA-1800-Efinal 9/30/02

AM/FM TUNER

LISTENING TO THE RADIO

1. P ress POWER/STANDBY
system ON.
2. P ress TUNER to select the radio function.
3. P ress BAND once or twice to select AM or
FM band.
4. P ress the TUNING f o rw a rd or backward
buttons to tune to the desired station.
Manual Tu n i n g – Press and hold the TUNING
f or e buttons until the display appro a c h e s
the desired station. Then press the buttons until
the display shows the exact fre q u e n c y.
Auto tuning – Press the TUNING f or e
buttons momentarily and release. The re a d i n g
moves up or down to the next available station.
5. T o shut the system off, pre s s
POWER/STANDBY .

STORING PRESET STATIONS

The unit enables you to program 20 FM stations
and 12 AM stations.
1. Tune to the station you wish to store .
11:55 AM Page 16
to turn the
2. P ress MEMOR Y once, and – – b e g i n s
f l a s h i n g .
3. P ress REPEAT/PRESET
assign the desired preset number.
4. P ress MEMOR Y again. The station is
s t o re d .
5. To store other stations, repeat the above
s t e p s .
RECALLING PRESET STATIONS
P ress PRESET repeatedly to select the desire d
s t a t i o n .
SOUND EQUALIZATION
P ress EQ repeatedly to cycle through the pre s e t
sound options on the display – FLAT, ROCK,
JAZZ, POP and CLASSIC.
FM ANTENNA
S t retch the supplied antenna (33) if stro n g e r
reception is re q u i red. For non-local stations,
connect a suitable external antenna (disconnect
the supplied antenna and store for possible later
u s e . )
1 6
repeatedly to