System Connections; What To Do If; Tuner/Amplifier Section - Sanyo DC-X5C Service Manual

SYSTEM CONNECTIONS

Speakers
When connecting the speakers, make sure that (+) and (–) polarities
are matched properly. Otherwise, the sound may appear to be
lacking in the bass range and in stability.
Connect the speaker wire with the stripe to the red terminal (+) and
the other wire to the black terminal (–).
Note:
If desired, the speaker grilles can be removed.
R ch speaker
SPEAKERS (6
R L

WHAT TO DO IF ....

If the operation of the system or display is not normal.
1. Disconnect the mains lead.
2. Press the RESET button (bottom of the Tuner/Amplifier) for at
least 30 seconds.
3. Connect the mains lead.
4. Resume the operatrion.
L ch speaker
MIN.)
AM loop aerial
AM LOOP
Tuner/Amplifier
EXT.ANT
AM LOOP FM75Ω
SYSTEM
CONNECTOR
DC 12V
DC 5V
~
AC 18V
SPEAKERS(6ΩMIN)
R L
VIDEO(AUDIO)
R L
IN
SUB WOOFER OUT
JCX-X5,JCX-077 Set front bottom
- 6 -
External aerial
Aerial wire
EXT.ANT
FM75Ω
RESET
RESET