Table of Contents
Advertisement
TROUBLESHOOTING
.
PROBLEM.
.
Can't make a call /
OUT OF RANGE
appears on the
handset.
Can't enter the
submenus.
Every button I press
calls a preset number.
Caller ID is not
displayed.
Handset does not ring.
When I'm talking on the • Make sure that your ear is touching the top
phone I keep activating section of the handset (receiver) when you .
other keys.
Batteries are low, even
if recharged.
I can't register my new
one handset.
I can't make an internal • Only one external call and one internal can
call.
POSSIBLE.CAUSES./.REMEDIES.
• Out of range of base unit- move your handset
closer to the base unit.
• Interference due to environment- position base
unit to reduce interference (move base unit away
from other electrical appliances.).
• De-synchronization has occurred. The base unit
will reset synchronization automatically.
• Handset may not be registered to base unit
(see REGISTRATION section Page 30).
• Ensure unit is not in cradle.
• Return to standby mode by pressing
• Phone is in Baby Call mode. To deactivate see
BABY CALL section page 28.
• Check your network subscription to Caller ID.
• Full name and number (incl. STD code) need
to be stored in phonebook for name display.
• Ring Volume 'OFF' (see CHANGE RING AND
KEY TONES section page 26).
are talking.
• Batteries may need to be replaced.
• A maximum of 4 units can be registered at
time. De-register a handset and try again.
• Make sure you select a base number that
has not been assigned.
take place at once. Make sure no other handset
is making a call.
34
.
Advertisement
Table of Contents
