Remote Control - Axent Primus User Manual

INTRODUCTION

REMOTE CONTROL

INTERFACE
When receiving remote control command, the main unit makes the following sound:
One short «beep»
Two short «beep»
One long «beep»
Low power will reduce the effect of remote control, please replace the battery in time.
PAIRING TO REMOTE CONTROL
It is necessary only after you replaced your remote control.
Please make sure there is sufficient power supply for the remote control before pairing.
Cut off the power of the intelligent toilet for 30 seconds and then apply power to it.
After three short «beep», start pairing by pressing « Stop » repeatedly until hearing
three times long «beep» from the intelligent toilet, which means pairing successful.
Stop
8
224000015700 普莱智能 泰国款 操作说明书 (1.00-RC2).indd 8
effective command
ineffective command
exceed the range of remote control
2018-05-11 11:05:06