Download Print this page

Axent PRIMUS Installation Instructions Manual

Hide thumbs Also See for PRIMUS:

Advertisement

PRIMUS
INSTALLATION INSTRUCTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRIMUS and is the answer not in the manual?

Questions and answers

Summary of Contents for Axent PRIMUS

  • Page 1 PRIMUS INSTALLATION INSTRUCTIONS...
  • Page 2 Thank you for placing your confidence in us. Thank you for buying AXENT products. You can learn from this manual about installation steps before initial start-up. Please follow the instructions in this manual carefully. Please keep the manual properly stored for future reference.
  • Page 3 INSTALL PREPARATIONS Please read theses instructions carefully before installation. Installation should be based on the steps documented in this manual. AXENT will not take responsibility for the negative consequences caused by the changed construction method without authorization. It shall be confirmed that the distance between the pit center and the wall matches with the product.
  • Page 4 PRE INSTALLATION CONFIRMATION DIMENSION Unit:mm ≥10 Please ensure that the distance from the wall and the product meets the requirements so that the repair work can be carried out normally. STANDARD DELIVERY CONTENTS...
  • Page 5: Installation Tools

    PRE INSTALLATION CONFIRMATION INSTALL PREPARATIONS 1.Ensure that the titles and wall bricks have been laid, at the same time the pipes in pit and water supply pipes have been reserved before installation. 2.It shall be confirmed that the height of pipe 5-10 mm over the ground, and distance from its center to the wall (distance between the pit center and the wall) matches with the product.
  • Page 6: Installation Steps

    INSTALLATION STEPS TOILET INSTALLATION ≥78 mm ≥ Please ensure that the distance from the wall and the product meets the require- ments so that the repair work can be carried out normally. 55 mm ø10 mm...
  • Page 7 INSTALLATION STEPS...
  • Page 8: Batteries Installation

    INSTALLATION STEPS REMOTE CONTROL INSTALLATION(TWO OPTIONS) MODE A(RECOMMEND) MODE B BATTERIES INSTALLATION...
  • Page 9 INSTALLATION STEPS MODE A ø 6 mm 35 mm Reference range for convenient use of position(Unit:mm)
  • Page 10 INSTALLATION STEPS 13 REMOTE CONTROL FIXED (OPTIONAL)
  • Page 11 INSTALLATION STEPS MODE B...
  • Page 12 TEST TEST 1)WATER SUPPLY Turn on the angle valve. 2)POWER ON Insert the power plug into the socket, and confirm that pushing the plug firmly in place. CAUTION! This device is an electric appliance of class I and must be connected to a grounding system. –...
  • Page 13 AXENT(Shanghai) Corporation Ltd. Add: A, C, D Rooms, 10F, No. 9 Zhenning Road, Changning District, Shanghai, China Tel:+86 21 5238 7080 E-mail: service@axentbath.com www.axentbath.com...