Connection - DENRYO PANcharge1k User Manual

3-3. Connection

Make sure AC power cable is plugging into connector (3P) firmly.
WARNING
Ground grounding wire on the plug of AC power cable properly. Improper connection may cause risk
of electric shock.
Battery charging cord
Do not connect battery and charging cord before setting charging voltage and charge begins.
Moreover, to prevent short circuit of charging clips, cover the clips when it is disconnected anything.
AC power cord
Make sure AC power switch is off.
Make sure grounding wire on the plug of AC power cable grounds properly.
Plug AC power cord into connector in the rear of charger.
Connect plug of AC power cord to power outlet.
Picture 3-3 Confirm the connection before charging begins.
Risk of electric shock.
Picture 3-2 Wiring diagram
① AC power cord
② Battery(positive)*
③ Battery(negative)*
*Connect battery after setting charging voltage.
8