Features; Mechanical Drawings; Front Panel; Rear Panel - DENRYO PANcharge1k User Manual

2. Features

2-1 Mechanical Drawings

2-2 Front Panel

2-3 Rear Panel

NOTE: Please replace the fuse with the same specification if replacement is required.
③ AC Input voltage switch
AC 115/230Vac adjustable
Set "115" for input 115Vac; set "230" for input 230Vac.
NOTE: Set the switch with voltage as same as the AC input. DO NOT input 200Vac under the setting
of 115.
① Power switch
" I " : ON ; " O " : OFF
② DC Output
" + " : Red ; " - " : Black
③ Charging voltage select button
12V, 24V, 36V & 48V selectable
①
AC inlet
Only use cord attached for AC input 100-
120Vac. For AC input 200-240Vac,
prepare a cable applies to 200-240Vac.
② AC fuse holder
20A/250Vac, φ6.35mm, length 31.75mm
fuse built-in.
5
[mm]