Save these instructions of PANcharge1k battery charger and batteries. This manual contains important safety and operating instructions. Operate PANcharge1k in a well-ventilated and dry area. Do not exposed to rain or snow. To reduce a risk of fire, do not cover or obstruct the ventilation enclosure.
1-3 Electromagnetic Disturbance This charger is designed under the consideration of electromagnetic interference radiation and immunity. However, installing without following this manual may cause the Interfere with radio communication. Operation of this equipment in a residential area is likely to cause harmful interference. When the interference happens because of the ON/OFF of the charger, follow one of the steps below to solve the problem.
2. Features 2-1 Mechanical Drawings [mm] 2-2 Front Panel ① Power switch “ I ” : ON ; “ O ” : OFF ② DC Output “ + ” : Red ; “ - ” : Black ③ Charging voltage select button 12V, 24V, 36V &...
Fan works when charger temperature rises; fan stops when charger temperature drops. Fan working depends on the different stages of rising temperature. PANcharge1k cools down by ventilation flows through the internal and WARNING extracted by fan. Always locate charger in a well-ventilation location to make sure it keeps cooling down.
3. Installation and Settings 3-1. Installation location Place PANcharge1k in a dry and clean area with well ventilation. Save at least 10 cm distance from the charger. Place in an area with ambient temperature 0℃~40℃. Locate charger as far away from battery as the DC cables permit. Set charger in a safe location far away from the risk of firing and gasoline.
3-3. Connection Picture 3-2 Wiring diagram ① AC power cord ② Battery(positive)* ③ Battery(negative)* *Connect battery after setting charging voltage. Make sure AC power cable is plugging into connector (3P) firmly. WARNING Risk of electric shock. Ground grounding wire on the plug of AC power cable properly. Improper connection may cause risk of electric shock.
3-4. Operation Setting Step 1. Make sure the AC power voltage switch is setting correctly. Step 2. Make sure nothing is connecting to charging clips. Step 3. Set 115 when input 90-120Vac; set 230 when input 180-240Vac. 115Vac Input voltage 230Vac Setting WARNING...
4. Operation 4-1. Battery Charging Curve PANcharge1k is a charging voltage adjustable battery charger. The charging voltage is able to be switched in accordance with the battery voltage of 12V, 24V, 36V or 48V by the battery voltage setting switch on the charger.
Table 4-2 3 Stage Charging Voltage & Current Battery voltage Charging voltage & current Charging voltage 14.5V 43.5V Floating voltage 13.8V 27.6V 41.4V 55.2V Max charging current Ending current of absorption 2.25A 2.25A 2.25A 2.25A 4-2. Operation and LED Indicators Step 1.
4-3. LED Indicator of Error Times flashed Possible cause Solution (times) Connect charging clips to the battery. Charging clips are not connecting to Contact us or the distributor if the battery. charging clips connected and charger Fuse of output terminal is broken. still errors.
5. Troubleshooting Refer to the table below to solve the certain problems. Problem Possible cause Solution LED does not work even the AC AC power is not inputting. Check if the AC power cord is power switch turns on. connecting correctly. Fuse of AC power is Check if fuse in the fuse holder in the broken...
Page 14
DENRYO CO., LTD. 28-5, Nishinippori 2Chome, Arakawa-ku, Tokyo 116-0013, Japan Phone: +81-3-3802-3671 Fax: +81-3-3802-2974 Email: info-en@denryo.com www.denryo.com/en DM-5103...