Auto Mode - Timeguard IRRDALI Installation & Operating Instruction

• OFF = Standby function deactivated.
• ON = Standby permanently set to ON,

4.7 Auto Mode

• Press this button to return to Auto Mode.
4.8 Test Mode
• Press this button to enter Test Mode.
• After 10 minutes it will automatically revert
6
4.9 Dim Adjustment Buttons
• Press the DIM Up button once and the
• Press the DIM Down button once and the
yet subject to the LUX setting.
to the previous mode (or alternatively to exit
Test Mode press the
buttons).
load comes ON to 10% light level. This
will increase by 10% for each button
press. The sensor LED indicator will flash
when it reaches the maximum of 100%.
load comes ON to 90% light level. This
will decrease by 10% for each button
press. The sensor LED indicator will flash
when it reaches the minimum of 0%.
or or