Maintenance - Craftsman 320.39598 Operator's Manual

A
,_L WARNING: Before cleaning or performing any maintenance, make sure that
the detail sander has been disconnected from the power source.
WARNING: Always wear safety goggles or safety glasses with side shields
when using compressed air to clean the tool. If the operation is dusty, also wear
a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Keep all
ventilation openings clean.
_1_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
_, WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
PROBLEM CAUSE SOLUTION
The sander does Not connected to Plug the sander into a
not work power source power source
Replace with new
Sandpaper is worn
Unsatisfactory sandpaper
sanding result Sandpaper is not suitable
for the workpiece Use correct sandpaper
15