Craftsman 320.39598 Operator's Manual page 12

DUST BAG (Fig. 5)
Your detail sander is supplied with
a dust bag to help you keep the
working area clean. The dust bag
is ideal for smaller jobs.
To install:
1. Disconnect the detail sander
from the power source.
2. Align the raised rib of the
dust-exhaust port with the
groove of the dust bag.
Fig. 5
Rib
Dust-exhaust port
3. Slide the dust bag forward and push it onto the dust-exhaust port until it is
firmly seated.
NOTE: From time to time, clean the dust-exhaust port with a dry brush.
To remove:
1. Disconnect the detail sander from the power source.
2. Grip the dust bag firmly and pull it out from the tool.
NOTICE: To improve dust extraction from the working area, insert a vacuum
adapter (available separately) onto the dust-exhaust port, and connect the
adapter to a suitable vacuum cleaner (available separately).
_1_ WARNING: For long periods of working with wood or on materials that
produce dust that is detrimental to health, the tool should be connected to a
suitable external dust extraction device.
,_ WARNING: The dust that is produced while sanding can be detrimental
to health, flammable, or explosive. Suitable safety measures are required.
Examples: Some types of dust are known to cause cancer. Always wear a dust
mask, and use the proper dust collection method: dust bag for small volume and
vacuum connection for large volume dust collection.
12