Advertisement
7.
Attach the five hooks to the top inside edge of the
bulkhead upper frame and the radiator cover.
BUMPER
MASK
HOOK
8.
Pull the mask toward the left fender, and slip the
left pocket of the bumper section onto the left
front corner of the fender. If necessary, apply
downward pressure on the headlight to install the
fender pocket.
BUMPER
MASK
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
BULKHEAD
UPPER FRAME
HOOK
RADIATOR
COVER
4524011K
POCKET
4524021K
AII 28606 (0502)
9.
Attach the plastic clip to the top inside edge of the
fender. Fit the mask across the bumper.
BUMPER MASK
TAB
10. Insert the three tabs between the headlight and
the bumper.
11. Repeat steps 8 through 10 to attach the mask on
the other side.
12. Pull the mask back toward the wheelwell, smooth
out any wrinkles, and snap the mask onto the
snap-screw. Repeat on the other side.
BUMPER MASK
13. On both sides of the vehicle, attach the three
plastic hooks to the fenderwell.
PLASTIC CLIP
4524031K
SNAP-SCREW
SNAP
BUMPER
PLASTIC
4526010K
HOOK
3 of 4
Advertisement
