Sanyo PLV-Z4000 Owner's Manual page 33

Reset
To reset the adjusted data, select Reset and press the Point
OK buttons. A confirmation box appears. Select [Yes] and then
press the OK button. All adjustments return to their previous
figures. You can also reset the adjusted data by pressing the
RESET button on the remote control.
Store
To store the adjusted data, select Store and press the Point
OK buttons. The User Image Mode Menu appears. Use the Point
buttons to choose one of the seven (7) user image modes
ed
and press the Point or OK buttons. A confirmation box appears.
8
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press
the Point 8 or OK buttons. The stored data can be called up by
selecting "User image 1 – 7" in the Image Mode Selection on
page 27 .
✔
Note:
• If you change the image mode (see page 27) or turn off the
POWER without storing adjusted settings, all the adjusted settings
will be reset.
• When resetting, the adjusted data in Advanced menu will be reset
whether or not Advanced menu in the Setting Menu is "On. " See
page 37.
or
8
8 or
Choose one of the seven (7) user
image modes with the Point
buttons and press the Point
OK buttons. The confirmation box
appears.
Image Adjustment
Press the Point or
8
OK buttons to store the
adjusted data. The User
Image Mode Menu
appears.
Quit
Press the Point
8 or OK buttons
ed
to exit the User
or
8
Image Mode
Menu.
Select [Yes] and then press the
OK button.
33