Refrigerator Removal / Disposal - Dometic DM2652 Operating Instructions Manual

MAINTENANCE & SERVICE
 FIRE OR EXPLOSION HAZARD.
NEVER use a wire or pin to clear obstructions
from burner jet (damage will occur). Failure to
obey this warning could result in death or seri-
ous injury.
 FIRE OR EXPLOSION HAZARD.
Do NOT attempt to adjust burner jet. Failure to
obey this warning could result in death or seri-
ous injury.
FIG. 17
6. Verify that the burner jet slots are centered un-
der the flue tube. See (FIG. 18).
7. Be sure to check the burner flame for proper ap-
pearance. The flame should be clear blue over
the slots of the burner. See (FIG. 18).
FIG. 18
Slots Centered
Under Flue Tube
Clear Blue Color
Of Flame
8. Check the electrode for proper location and gap.
Adjustments may be made with needle nose pli-
ers if necessary. See (FIG. 19).
FIG. 19 Electrode
Burner Tube
9. Turn on the manual gas shut off valve.
10. Examine all fittings for leaks. Use a commercial
non-corrosive bubble solution.
11. Connect the 120 VAC power cord.
12. Reconnect/Turn on the 12 VDC power.
13. Check LP gas safety shutoff.
C.

Refrigerator Removal / Disposal

 T o be performed by a qualified service techni-
cian only.
See Installation Instructions for refrigerator removal
/ replacement procedure, and for recycle informa-
tion.
14
1/8" to 3/16"
(3-5 mm)