Adjusting Screen; Zoom Adjustment; Focus Adjustment; Keystone Adjustment - Sanyo PLC-XW20 Owner's Manual

BASIC OPERATION
Move ZOOM LEVER upward to make the image larger. Move ZOOM
LEVER downward to make the image smaller.
Rotate the FOCUS RING to adjust the projected picture focus.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
Press KEYSTONE L/M button on Remote Control Unit or select
1
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
Correct keystone distortion by pressing KEYSTONE L/M button
2
or POINT UP/DOWN button(s). Press KEYSTONE L button or
POINT UP button to reduce the upper part of image, and press
KEYSTONE M button or POINT DOWN button to reduce the
lower part.
Reduce the upper width with KEYSTONE L button
or POINT UP button.
Press FREEZE button on Remote Control Unit to freeze the picture
on-screen. To cancel FREEZE function, press FREEZE button again
or press any other button.
20

ADJUSTING SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

KEYSTONE ADJUSTMENT

Reduce the lower width with KEYSTONE M button
or POINT DOWN button.

PICTURE FREEZE FUNCTION

ZOOM LEVER
WIDE
TELE
FOCUS RING
• Arrows are white in no correction.
• The arrow of direction being corrected turns red.
• The arrow disappears at the maximum
correction.