Maintenance; Cleaning And Care; Repairs; What To Do If - Gastro-Cool GCPF80 Instructions For Use Manual

10 Maintenance

10.1 cleaning and care

If the appliance is dirty, proceed as follows:
1. Before beginning with repair or cleaning works make sure the
device has been disconnected from power socket (pull the power
plug!!!) and has cooled down.
2. Clean the interior (including the rear wall and bottom) with warm
water and a mild cleaning product. Do not use any aggressive
cleaning products!
3. Dry all surfaces carefully.
4. After cleaning reconnect the refrigerator to the mains supply.
5. Never clean the appliance with steam cleaning equipment.
6. Regularly clean the refrigerator and aslo check the condensation
water outflow hole.

11 Repairs

WARnInG:
!
may only be carried out by an expert qualified
to do so. A repair carried out incorrectly or
unprofessionally puts the user at risk and leads to
the warranty becoming invalid!
WARnInG:
WARnInG:
the food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.
34
Repairs to electrical appliances
Do not damage the refrigerant circuit.
Do not use electrical appliances inside

12 What to do if...

Solutions to problems
The design of the appliance warranty interruption-free operation and
a long working life. If nevertheless a fault does occur during operation,
check whether this can be traced back to an operating error.
Any subsequent faults can be eliminated by yourself by checking the
possible causes:
Fault Possible causes
The appliance Is the mains plug in the
is not cooling socket?
Has the fuse in the
socket been triggered?
The appliance Is the appliance
is noisy when standing vertically or
operating horizontally?
Water is Has the temperature
lying on the regulator been set
bottom of the correctly?
refrigerator
Is the condensation
water channel blocked?
The appliance Is the appliance
is not cooling ventilation blocked?
correctly
Measures
Insert the mains plug
correctly in the mains
socket, switch on the
fuse, if required call for
expert assistance.
Adjust the appliance
using the feet.
The flow noises in the
refrigerant circuit are
normal.
Correct the temperature
regulator setting. Clean
the outflow opening
with a pipe cleaner.
Clear the ventilation
slot, position the
appliance freely.
35