Makita 3709 Technical Instructions page 4

W
iring diagram
Wiring of Field Lead Wires (Before Mounting Electrical Parts)
Put field lead wire (white) into lead wire holder as Fig.10.
Fig.10.
Wiring of Field Lead Wires (After Mounting Electrical Parts)
1. Put one of lead wire of Power supply cord into lead wire holder.
2. Put one of lead wire (white) of Noise suppressor into lead wire holder.
See Fig.11.
Fig.11.
Lead Wire of
Power Supply Cord
Cord Clamp
Power Supply
Cord
Lead Wire Holder
Terminal Block is not used in the machine for
some countries.
Terminal Block
Noise Suppressor
Noise suppressor is not used in the machine for
some countries.
to Terminal Block
Field Lead Wire
(white)
to Switch
Field Lead Wire
(black)
Switch
Noise Suppressor's
Lead Wire (white)
P 4 / 4