Timer (Self-Triggering) - Agatec AgaTape Manual

GB
Stake out function
GB This function is helpful when staking out equal
distances, e.g in the erection of wooden substruc-
F
tures. See drawing {I}
5x briefly: the
I
A value is displayed in the summary row (default
E
value 1.000 m). This value can be adjusted to the
desired stake out distance.
P
The value is increased.
NL
The value is reduced.
DK
Holding the button down accelerates the speed at
S which the value changes.
1x briefly: starts continuous measurement.
FI
In intermediate line 1, the set distance or the next
RUS
appropriate multiple thereof is displayed.
In the summary row, the distance to the next appro-
PL
priate stake out point is displayed.
CZ
When approaching a stakeout point (to less than
0,10 m), the instrument starts to beep. When the
SK
point is reached, the beep sound changes and inter-
mediate line 1 starts to flash.
SLO
1x briefly: distance measurement is interrupted
H
and the instrument switches back to individual
distance measuring mode.
Functions
symbol is displayed.

Timer (self-triggering)

1x long: The
The timer is preset to 5 seconds.
The value is increased.
The value is reduced.
Holding the buttons down increases the rate of
change of the values.
The countdown starts automatically (if the laser is
activated) and then triggers the measurement.
Switching off the beep
Press and hold simultaneously for 5
seconds:
The beep is switched off.
To reactivate it, press and hold for 5 seconds.
8
symbol is displayed.
Agatec AgaTape