Sanyo PLC-XC56 Owner's Manual page 32

Sanyo projector user manual
Hide thumbs Also See for PLC-XC56:
Table of Contents

Advertisement

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point
or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
Point
or the SELECT button. Move the highlight to one of
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 70p, 105i or 1080i is selected in the
PC System Menu (p.29).
• PC adjust Menu cannot be selected when Computer (PC digital) and Computer (AV HDCP) are selected in
the Input Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.

Mode free
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Store
Store
Press MENU button
to close this dialog
box.
This Mode has stored
parameters.
Press SELECT button to
clear the stored data.
Vacant
store?
Press SELECT button to
store the data.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xc56 - 3100

Table of Contents