Table Of Contents - Falltech EcoAnchor User Manual

1: Warnings and Advisories
2: Fall Protection Basics - ABCD's2.1:
Anchorage
2.2: Body wear
2.3: Connectors/Connecting
devices
2.4: Deceleration devices
2.5: Fall Arrest
2.6: Fall Restraint
2.7: Work Positioning
2.8: Free-fall
2.9: Clear-fall
2.10: Swing-fall
3: Use and Limitations
3.1: General Guidelines
3.2: Approved applications
3.3: Restricted Applications
3.4: Installation and Use -
EcoAnchor for single-users
3.5: Installation and Use -
EcoAnchor with 4-User Temporary
HLL Kit
3.6: Installation and Use -
EcoAnchor with PSR Temporary
HLL Kit
This instruction manual is applicable to the following FallTech products:
Model #
7433
7433A FallTech EcoAnchor - kit version
G7433 FallTech EcoAnchor - alt. version
778000 75' EcoAnchor/Checkline HLL Kit
778100 100' EcoAnchor/Checkline HLL Kit
*If using this EcoAnchor with the Checkline Temporary Horizontal Lifeline Kit (Model #'s
778000 or 778100), be sure to read, understand and follow not only this instruction
manual, but the instructions for the Checkline HLL as well. If you are using EcoAnchor
with one of the FallTech PSR Temporary Horizontal Lifeline kits, be sure to read, follow
and understand the instructions included with the HLL as well.
Section 1: Warnings and Advisories
This product is to be used as a part of a personal fall arrest system, and should be
used only with compatible components. Please see Advisory #3 in this section
for further details. Failure to use compatible components can result in a failure of
the system to perform as intended, which may result in serious injury or death.
Throughout the OSHA regulations for safety and health, there are references to
Competent Persons and Qualified Persons. ANSI Z359.0-2007 goes on to further
define the roles and qualifications of these individuals; as well as Authorized
Persons, and their importance in the workplace. These terms are also used in
these instructions. Below is a brief description of the part these individuals play
in the employment of fall protection equipment:

Table of Contents

Description
FallTech EcoAnchor
4: Product Selection
5: Anchorage Considerations
6: Employer and User Training
6.1: Special notes for the
employer
6.2: User training
7: Fall Protection Plan
7.1: The fall protection plan
7.2: Suspension trauma
7.3: Rescue plan
8: Product Inspection
8.1: Issuing
8.2: Daily/Incidental use
8.3: Mandatory semi-annual
inspection
9: Maintenance and Storage
10: Specifications
10.1: Mandatory disclosures
10.2: Performance specifications
10.3: Labels and markings
10.4: Standards and references
Appendix A: EcoAnchor with
Checkline Clear-Fall Requirements
Appendix B: EcoAnchor with PSR
Clear-Fall Requirements
Product Listing
Also includes Checkline manual*
Also includes Checkline manual*
Notes
n/a
n/a
n/a