Power Off Menu - DENECKE JB-1 User Manual

Flip Display
To rotate the display 180 degrees, scroll down (Click) to FLIP DISPLAY and select (Click & Hold 1 second):
F L I P D I S P L A Y
Backlight Timer
To change the timer for the Backlight, scroll down (Click) to BACKLIGHT TIMER and select (Click & Hold 1 second):
B A C K L I G H T
The choices are:
1 0 S E C O N D S
3 0 S E C O N D S
1 M I N U T E
1 0 M I N U T E S
N O T I M E
C A N C E L
E X I T
The backlight timer turns off the backlight after the selected amount of time. One can always turn the backlight on at the top
level, with no menu shown by Clicking the push button. 30 seconds is the factory default, and, of course, conserves battery
power. NO TIME OUT will disable the backlight timer, so the backlight will stay on indefinitely (this will significantly reduce
battery life).
Note: when the unit is powered externally (by USB), the backlight remains on.

Power Off Menu

To power the unit off, scroll down (Click) to POWER OFF and select (Click & Hold 1 second):
P O W E R
Then choose Turn Power Off, if desired:
T U R N P O W E R
C A N C E L
E X I T
Note: powering off the JB-1 will cause it to lose sync with Timecode, but all User Settings will be retained by the unit's built-in
memory.
©2018 Denecke, Inc.
Denecke JB-1 User's Manual
T I M E R
O U T
O F F
O F F
25209 Avenue Tibbitts * Valencia, CA 91355 * (661)607-0206
www.denecke.com * email: info@denecke.com
8
D , I .
ENECKE NC