Push Button - DENECKE JB-1 User Manual

Push Button

Control of the JB-1 is achieved through a simple push button.
To turn on the unit, press the button in.
Click the push button to turn on the backlight.
At the top (main) level:
•
Hold push button 2 seconds to unlock the main menu.
•
Click the button to show the main menu (when menu unlocked).
In a menu:
•
Click to scroll through menu items.
•
Click & Hold 1 second to select the desired menu item.
LED
Indicates battery and sync/internal run status.
When the LED is off, the syncbox is not generating timecode. Note: LED
is illuminated for one second at power-up.
The LED (green) indicates when the JB-1 is generating timecode. The
LED flashes once per second (at the start of the frame 00).
Two flashes per second indicates battery low.
Three flashes per second indicates battery dead. The internal battery
should be recharged as soon as possible when dead battery is indicated.
©2018 Denecke, Inc.
Denecke JB-1 User's Manual
4
D
ENECKE
25209 Avenue Tibbitts * Valencia, CA 91355 * (661)607-0206
www.denecke.com * email: info@denecke.com
1/second
2/sec., double blink rate
3/sec., triple blink rate
, I .
NC