Tc Setup Menu - DENECKE JB-1 User Manual

•
Jam Once (JO) is used when the operator sets the Jam Rate (see Frame Rate section) for TC OUT, regardless of the TC
IN rate. Jamming occurs when TC IN is connected.
Cross Jam: Jamming of different frame rates can be accomplished. The JB-1 is capable of cross jamming any selected
rate to any TC IN rate.
* When Cross Jamming, the Indication changes to "XJO". The LED and TC display are, as usual, in sync with TC OUT.
* Note: Integer (24,25,30) and non-integer rates (23.976, 29.970) are not compatible with one another for Cross
Jamming.
•
After making a selection, the JB-1 automatically leaves the Menu screen (Click push button to return to menu, if
desired). If no selection is desired, select Cancel to go back up to Main Menu. Select EXIT to exit the Main Menu.
When the Main Menu is exited, the menu lock will engage after 10 seconds of switch inactivity.

TC Setup Menu

To select Timecode Setup, scroll down (Click) that menu row and select (Click & Hold 1 second):
T I M E C O D E
These choices will activate sub-menus:
F R A M E
T C O U T P U T
U B R O L L O V E R
C A N C E L
E X I T
To select Frame Rate, scroll down (Click) to FRAME RATE and select (Click & Hold 1 second):
* Note: this entry is only available in Jam Once Mode (JO).
F R A M E
The Frame Rate selection choices, in Frames Per Second (FPS) are shown below:
3 0
2 9 . 9 7 0
2 5
2 4
2 3 . 9 7 6
3 0 D F
2 9 . 9 7 0
C A N C E L
E X I T
DF indicates Drop Frame Modes. Note: In AJO mode, TC OUT is automatically set to the same rate as TC IN, so this menu entry
is not available.
©2018 Denecke, Inc.
Denecke JB-1 User's Manual
S E T U P
R A T E
L E V E L
R A T E
D F
25209 Avenue Tibbitts * Valencia, CA 91355 * (661)607-0206
www.denecke.com * email: info@denecke.com
6
D , I .
ENECKE NC