Overview; Operating Guide - PetSpy p-collar 320 Manual

Overview

LCD Display
Action Buttons
Selecting Channels
Transmitter
Contact Points
On/Off
Button
Receiver Collar
Antenna
LED Indicator Light
Intensity Level
Adjustment
Blind Operation
Identification Point
Easily distinguish
and send the correct
training command
without eyes on by
touching and feeling
on buttons with
different structure.
(with cover)

Operating Guide

1
Step
To turn the Transmitter on
1. Press any of
The backlight on.
2. Backlight will stay for about 3
then, backlight off.
3. LCD display will stay for about 5 minutes. if no operation
then, LCD display shuts off.
To turn the Receiver Collar on
Press once, the green light on and will flash every
5 seconds under working mode.
To turn the Receiver Collar off
1. Press and hold the On/Off Button until the Red LED
light shuts off.(This takes approximately three seconds.)
2. Release the On/Off Button.
Note: To extend the life of the batteries, turn the Receiver
Collar off when it is not in use.
to active the Transmitter.
econds. if no operation