Install The Cable Management Clip - Readiness Systems AED Sentinel Installation Manual

Install the AED Sentinel Monitoring Hardware

Install the cable management clip

1.
Attach the cable management clip. Peel the protective backing off one of the
included cable management clips (we've provided one extra). Attach it to the ceiling
of the cabinet midway between the hinged side of the cabinet and the antenna hole
with the open end facing front, toward the cabinet door.
2.
Manage the cables. Catch the ribbon cable and antenna cable in the strap of the cable
management clip, then feed the strap through the clip latch. The clip should hold the
cables loosely – one or two holes from the end is enough. Move the communications
module up if you need more play in the ribbon cable.
CEILING OF
CABINET
ANTENNA
CABLE
MANAGEMENT
CLIP
ANTENNA
CABLE
CABINET DOOR
COMMUNICATIONS
MODULE
R E
A R
F R
O N
T
7
COMMUNICATIONS
MODULE
LED LIGHT AND
ROUND BUTTON
FACING TOWARD
CABINET DOOR
ANTENNA
CABLE
RIBBON CABLE