Safety Measures To Be Taken In The Event Of A Flat Tyre Or A Wheel Change - Mercedes-Benz TRAVEGO Operating Instructions Manual

Table of Contents

Advertisement

The figures in the table show
the respective axle load in
kg. The first row of the table
shows the tyre pressure to be
set (in bar).
Note:
3-axle models are equipped
with tyres having an
increased load capacity
(154/148 or 154/149).
These tyres have a maximum
pressure of 8.5 bar for 7.5 t
axle load (single-tyre version).

Safety measures to be taken in the event of a flat tyre or a wheel change

Note:
The tyre pressures table
shown here cannot be con-
sidered complete and is
primarily provided for guid-
ance only. The tyre catalogue
of the manufacturer con-
cerned is the decisive point
of reference for the precise
tyre pressures to be set in
accordance with the current
axle load.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
Practical advice
Safety measures to be taken in
the event of a flat tyre or a wheel
change
Danger.
Park the bus as far away as possible from
the traffic and on firm ground. Switch on
the hazard warning lamps. Let all passen-
gers disembark and move them out of the
danger zone (e.g. behind the crash barri-
er). Position a warning triangle or hazard
warning light at a suitable distance. Ob-
serve the legal requirements of the coun-
try concerned.
Danger.
Only change the wheel on a level, firm
and non-slip surface. The bus or jack
may slip out to the side on a soft or slip-
pery surface (snow, ice, smooth surface,
etc.).
477

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travego lTravego m

Table of Contents