Activation/Deactivation Of Active Brake Assist (Automatic) - Mercedes-Benz TRAVEGO Operating Instructions Manual

Table of Contents

Advertisement

Active Brake Assist has not detected
the hazardous nature of the situation
Active Brake Assist is switched off
Active Brake Assist has failed.
Brake the bus using the service
brake.
Danger. Risk of accident.
If Active Brake Assist has already initiated
emergency braking, it is possible to can-
cel this braking by kickdown (depressing
the accelerator pedal beyond the pressure
point) or by pressing the Active Brake As-
sist pushbutton.
If you do not receive a visual or aud-
ible warning in a critical situation, Active
Brake Assist has either failed to detect
the danger, is deactivated or has malfunc-
tioned. Brake the bus using the service
brake. Active Brake Assist cannot always
interpret complex driving situations un-
equivocally. If, in a non-critical situation,
a visual and/or audible warning is issued
or partial braking is initiated, you can de-
activate the system by operating
the turn signal switch,

Activation/deactivation of Active Brake Assist (automatic)

the brake pedal,
the accelerator pedal or
the Active Brake Assist pushbutton.
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
Driving systems
Activation/deactivation of Active
Brake Assist (automatic)
Active Brake Assist is activated
automatically.
Insert the vehicle key and briefly
press the "Start/Stop" pushbut-
ton. The indicator lamp in the Active
Brake Assist pushbutton goes out.
Active Brake Assist is deactivated
automatically
if the chassis frame is not at normal
level (raised, lowered),
in the event of a malfunction in the
Active Brake Assist electronics sys-
tem,
in the event of a malfunction in the
vehicle's brake system.
255

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travego lTravego m

Table of Contents