Lavatory
Emptying the holding tank
Emptying the holding tank
M86_00-0038-01
To empty the holding tank, it is ne-
cessary to park the bus such that
the sewage discharge opening (12)
is positioned over a suitable sewage
collection point.
Note:
Switch on the ignition and enable the lav-
atory using the switch on the instrument
panel.
434
TRAVEGO / TRAVEGO M / TRAVEGO L (Euro VI)/07.2014 GB
M86.30-0058-71
Turn compressed-air tap (1) clock-
wise to the "AUF" (OPEN) position.
Press auxiliary pushbutton (2).
Note:
Compressed-air tap (1) is located behind
the WC service cover.
Environmental protection
Dispose of sewage in an environmentally
responsible manner. The rules and regu-
lations of the country in which the vehicle
is operated must be observed.
The drainage valve on the holding
tank is opened.
After it has emptied, close
compressed-air tap (1). Then press
auxiliary pushbutton (2).
Note:
The waste slide valve closes.