Marking Desired Scenes - Sanyo DVD-L70 Instruction Manual

MARKING DESIRED SCENES

The unit stores the points that you want to
watch again up to 3 points. You can resume
playback from each scene.
Notes:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn the power off.
• Some subtitles recorded around the marker may fail to appear.
• You cannot do marking operations with MP3/WMA/JPEG CDs.
Marking the Scenes
1
Press [MARKER] during playback.
Marker
Marker
Marker
2
Select the blank Marker using [ ] or [ ].
1, 4
2
3
Press [ENTER] at the desired scene.
The time when you press [ENTER] is set.
Marker
Marker
3
Marker
4 Press [MARKER] again to close the "Marker" screen.
• The unit stores the points that you want to watch again
up to 3 points.
Returning to the Scenes
1
1
Press [MARKER] during playback or stop mode.
2
Marker
Marker
Marker
2
Press [ ] or [ ] to select the Marker 1 ~ 3.
3
3 Press [ENTER].
Playback starts from the marked scene.
To Cancel the Mark
1, 4
1
Press [MARKER] during playback or stop mode.
3
2
Press [ ] or [ ] to select the Marker 1 ~ 3.
2
3
Press [CANCEL].
4
Press [MARKER] again to close the "Marker" screen.
-E24-
1
2
3
/Enter/Cancel/Marker
1 00 27 54
2
3
/Enter/Cancel/Marker
1
00 27 54
2
01 16 25
3 02 08 31
/Enter/Cancel/Marker
DVD CD