Sanyo DVD-L70 Instruction Manual page 10

Portable lcd tv/dvd player
Hide thumbs Also See for DVD-L70:
Table of Contents

Advertisement

Before Using the Remote Control
Before using the remote control for the first time, pull out the film from the bottom of the remote control.
To Replace the Battery
Removing the battery holder
1
Hook your fingernail on
and
as in the diagram
below, and pull the battery
holder out while pressing
in the direction indicated by
the arrow.
• Under normal usage, the battery will last from 6 months to a year. However, the attached battery is for
confirming operation of the remote, so the battery life could be shorter. If it becomes difficult to operate,
please replace the battery.
ä£ìdírÇÃéÊà Ç¢Ç...ǬǢǃ
ä£ìdírÇÃéÊà Ç¢Ç...ǬǢǃ
ìdírÇÃéÊà Ç¢Ç...ǬǢǃ
How to handle batteries
If you misuse the battery, it may leak, get hot or burst
so make sure to do the following.
• Keep batteries out of the reach of
children.
• If a battery is swallowed, consult with a
doctor immediately.
• Do not heat, dismantle or throw a battery
Warning !
in a fire.
• Do not short out a battery.
• Insert as indicated by the (+) sign.
• Do not use a battery other than the one
specified.
• Remove the battery when it is used up.
• Remove the battery if you won't be using
the unit for a while.
Caution!
If liquid leaks out of the battery...
• Wipe off the liquid well.
• If the liquid touches your skin or clothes,
wash off with plenty of water.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST
BE RECYCLED OR DISPOSED OF PROPERLY
IN COMPLIANCE WITH ALL APPLICABLE
LAWS.
FOR DETAILED INFORMATION, CONTACT
YOUR LOCAL COUNTY SOLID WASTE
AUTHORITY.
Film
Inserting the battery
2
Remove the old battery,
and insert a new battery in
the battery holder with the
+ side up.
Lithium Battery (CR2025)
-E10-
Inserting the battery holder
3
Install the battery holder in the
direction indicated by the
arrow.
Operation of your remote control
Operate the remote control within 30˚ angle on either
side of the remote sensor, up to a distance of approx.
6 meters.
Remote sensor
To make your remote control work properly...
Your remote control may not function properly or fail to work
at all in the following circumstances.
• If there is an obstruction between the remote and the main
unit.
• If direct sunlight or a strong light shines on the remote
sensor.
Approx. 6 meters

Advertisement

Table of Contents
loading

Table of Contents