CONTENTS
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
FEATURES
Using this unit you can display the live pictures from the
cameras in split screen display mode (16, 9 or 4 divisions) while
recording, and the recorded pictures can also be displayed in
split screen display mode.
•
High-speed switching (up to single field switching)
•
1, 4, 9, 16 screens display modes, with possibility of
displaying an automatic sequential live or recorded pictures
display in the bottom right 1/4 of the screen while in 9 or 16
split screen display mode.
•
Full screen display on monitor 2 and during alarms automatic
switching to the alarm screen.
•
The following operations are possible at each camera
according to the timer settings:
•
Programmed recording of certain or all cameras only can be
done according to the day or night periods.
•
Different alarm durations of certain or all cameras can be set
according to the day or night periods.
•
Live or recorded pictures of certain or all cameras can be
masked so they are not visible according to the day or night
periods.
•
Automatic switching delay can be set for each camera
according to the day or night periods.
•
Video sensor points areas can be set for each camera.
Trigger can start alarm recording operations in priority.
•
If the video signal is interrupted at any of the cameras, the
frozen image just previous to the interruption or color bars
can be displayed (selectable for each camera).
•
The unit can be controlled by computer through the RS232C
connection.
•
A system controller (sold separately) can be used through the
RS485 (RJ-11) connection.
•
2 monitors output and S-VIDEO input/output (MPX-CD162
model only).
•
Up to 100 alarm entries can be displayed on-screen.
ACCESSORIES
Power cord x1
To mount this unit onto a rack, please use the rack mount
hardware sold separately.
2
Fixer
Power cord tie x1
English