Sanyo MPX-CD162 Instruction Manual page 29

CLOCK AND DAYLIGHT SAVING SETTING
(DAYLIGHT SET)
The default daylight saving time function setting is "NO USE", so
the daylight adjustment will not be made.
If the unit will be used in an area where there is a daylight
saving time change, set it to "USE", then if necessary, set when
the daylight saving time is changed.
The default settings are:
Daylight saving time from the last Sunday of April, at 2:00 AM
(1ST-SUN 04 02:00) to last Sunday of October, at 2:00 AM
(LST-SUN 10 02:00).
TO MAKE CHANGES TO THE SETTINGS
1
Press the l button to highlight the "NO USE" setting,
then press the + (or –) button to select "USE", and
press the l button one more time.
2
Example: Setting the daylight saving time from the
second Tuesday of May at 3:00 AM, to the
fourth Tuesday of September at 3:00 AM.
1 Press the + (or –) button to set the WEEK (2ND), then
press the c button.
Menu: 1ST, 2ND, 3RD, 4TH or LST (first, second, third,
fourth or last)
2 Press the + (or –) button to set the WEEK (TUE), then
press the c button.
Menu: SUN, MON, TUE, WED, THU, FRI, SAT or SUN
3 Press the + (or –) button to set the MON (05), then press
the c button.
Menu: 1, 2, 3, 4 ..... 11, 12
(for January, February, March ..... December)
4 Press the + (or –) button to set the TIME (03), then press
the l button.
•
Following the same procedure as above, set when the
time is changed back from daylight saving time to
standard time (the OFF settings).
3
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
1
2-
2
2-
4
28
Menu 2
2-
1
2-
3
English