Memory Cooking; Power Level Setting Guide - Sanyo EMS-8600S Instruction Manual

MEMORY COOKING

You can enter five cooking programs to be saved in MEMORY. Each program can have up
to 2 cooking stages, as some recipes require different stages of cooking at various power
levels to get better results. Each stage can be programmed with a different time
and power level.
To set a MEMORY cooking program:
Step
1 Press MEMORY 1-5 times to input a cooking program.
2 Follow steps 1 & 2 for TIME COOKING for the first stage (do not
press start).
Example: To cook for 10 minutes at 90% power level for first stage.
+
3 Enter cooking time and power level for the second stage.
Example: To cook for 3 minutes at 20% power level for second
stage.
+
4 Press MEMORY to save the program.
To start a MEMORY cooking program:
Step
1 Press MEMORY 1-5 times to access saved programs.
2 Press START/+30SEC.
+ or will flash while cooking.
Note : • When START/+30SEC. is pressed, the display will count down remaining
cooking time in Stage 1. The oven will beep and start Stage 2.
• Five beeps indicate the MEMORY program is finished.

POWER LEVEL SETTING GUIDE

100 % • Cooking poultry, vegetables,
(PL10) and most casseroles.
• Boiling water.
• Preheating a browning dish.
90 % • Reheating rice and pasta.
(PL9)
80 % • Reheating precooked or
(PL8) prepared food quickly.
• Cooking fish.
70 % • Cooking cheese dishes.
(PL7)
60 % • Cooking scrambled eggs.
(PL6) • Baking cakes.
Procedure
or indicators light.
or indicators light.
Procedure
50 % • Cooking custards and pasta.
(PL5) • Cooking rump roast, ham, veal, lamb.
40 % • Cooking less tender cuts of meat
(PL4) in liquid or slow-cooking dishes.
• Completing the cooking cycle
of less tender roasts.
30 % • Completing the cooking cycle
(PL3) of casseroles, stews, sauces.
• Manual defrosting.
20 % • Softening chocolate.
(PL2) • Clarifying butter.
• Heating breads, rolls, pancakes,
tacos, tortillas, French toast.
10 % • Softening cream cheese, butter.
(PL1) • Keeping casseroles warm.
-13-
Keypad
MEMORY
POWER
(Press POWER two
times) PL 9 appears
in the display
10:00
POWER
(Press POWER nine
times) PL 2 appears
in the display
3:00
MEMORY
Keypad
MEMORY
START/+30SEC.