Fire-Lite Alarms BG-12LX Operating Instructions page 2

Setting the BG-12LX Address
The BG-12LX Addressable pull station is factory preset with address '00.' Set the address for
the pull station by turning the rotary address switches on the addressable module mounted
inside the pull station. Only one device per address is allowed. Multiple modules may not
be set to the same address on the Signaling Line Circuit. Once the address is set, record it
in the space provided on the product ID label located inside the pull station.
LED OPERATION
Normal:
Flash RED
Alarm:
Steady RED
Note: LED is visible
through translucent
handle.
Note – Opening the
pull station door
will not activate or
deactivate the alarm
switch.