Subscribe to Our Youtube Channel
Related Manuals for ATX QFHPN
Summary of Contents for ATX QFHPN
- Page 1 D3.1/CCAP Enhance ™ ® Compliant QFHPN High Power Optical Node with AGC INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com...
- Page 2 ® service mark of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or foreign patents. Other non-ATX product and company names in this manual are the property of their respective companies.
-
Page 3: Table Of Contents
Contact ATX Networks ........ - Page 4 This page intentionally left blank HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®...
-
Page 5: Important Safeguards
CLASS 1M LASER PRODUCT The ATX Networks’ QFHPN compact node is classifi ed as Class 1M per IEC/EN 60825-1/A2:2001. This product complies with FDA/CDRH, 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated 26 July, 2001. - Page 6 CHAPTER 1: IMPORTANT SAFEGUARDS This page intentionally left blank HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®...
-
Page 7: Installation And Operation
11. Mode LED Optical in/out power 12. Mode LED Attenuation settings 13. Mode LED Equalization settings (tilt) Figure #2 – QFHPN 1-way Receive Only Compact Node HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®... -
Page 8: Installation
Installation The ATX Networks QFHPN compact node is designed to operate in a utility room or closet. It must be placed in a location where it will not be directly exposed to liquid or to extreme temperatures. Please refer to Figure 1 or Figure 2 above (depending on model being installed) for installation and operation. -
Page 9: Power Up And Test
Using an RF Signal Meter, verify the RF input to the compact node is between+23 dBmV and +35dBmV. The measurement at RF upstream input test port will be 20 dB below the actual input level. HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®... -
Page 10: Fine-Tuning The Compact Node To The Rf Network
Click the return button to set the equalization value into memory. The display stops blinking. The RF tilt has now been changed and set. HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®... -
Page 11: Specifications
-10⁰C to +55⁰C (+14⁰F to +131⁰F) HUMIDITY 5-95% Non-condensing DIMENSIONS 1.42”H x 6.43”W x 5.45”D (3.6H x 16.3W x 13.8D cm) WEIGHT 1.1 lbs (0.5 kg) HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®... - Page 12 CHAPTER 4: SPECIFICATIONS This page intentionally left blank HFC Enhance – QFHPN High Power Optical Node with AGC – Installation & Operation Manual ®...
-
Page 13: Service & Support
Please contact ATX Technical Support for assistance with any ATX products. Please contact ATX Customer Service to obtain a valid RMA number for any ATX products that require service and are in or out-of-warranty before returning a failed module to the factory. - Page 14 9001:15 REGISTERED ATX Networks © 2018 ATX Networks 1-501 Clements Road West, Ajax, ON L1S 7H4 Canada Information in this document is subject to change without notice. Tel: 905.428.6068 | Toll Free: 800.565.7488 | support@atxnetworks.com Rev. 08/18 (ANW1004) www.atxnetworks.com...
Need help?
Do you have a question about the QFHPN and is the answer not in the manual?
Questions and answers