Changing The Turn Signal Bulb (Option: Turn Signal, Round) - KTM Freeride E-XC 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.8
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
98
C00814-10

Changing the turn signal bulb (Option: Turn signal, round)

A00135-10
–
3
Press headlight bulb
counterclockwise, and pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) (
–
Insert the rubber cap with the bulb socket into the reflector
and turn it clockwise all the way.
Info
Ensure that O-ring
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. (
–
Install the KTM PowerPack. (
–
Lock the seat. ( p. 63)
–
Check the headlight setting. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser
lightly into the bulb socket, turn it
p. 128)
4 is seated properly.
p. 96)
p. 103)
p. 99)
p. 37)
p. 102)
p. 65)
1
.