Remote Control Operation - Sanyo DP50741 Owner's Manual

REMOTE CONTROL OPERATION

Selects the video source to view. Holding
down the key displays the Input List.
Modifies the Energy Saver level (see page
12 for details.)
Cycles through the available Caption
modes (when available.)
Pressing it twice restores your HDTV to its
factory settings. All user customized set-
tings will be cleared.
Select channels directly.
F
or channels 100 and up, press and hold
the first number, then enter the remaining
two numbers.
Scan through the channels in the memory
database.
Switch between current channel and last
selected channel.
Displays the Channel Information banner.
Displays or hides the on-screen menu.
Cycles through the available aspect
ratios. The different settings either
stretch, zoom, or fill the image on your
screen. Bars may appear on top and bot-
tom of your screen (or on left and right
sides) depending on the broadcasted sig-
nal or program. (See page 13)
8
Need help?
www.sanyoctv.com
Stereo, Mono, or SAP (when available.)
Displays the current switch on time (see
Displays the "Off" Timer. While Off Timer
is on-screen, press the "0" key to Set the
amount of time (in 30 minute increments)
at which the HDTV will turn off.
Increases or decreases the audio level.
Allows for the direct selection of digital
subchannels. For example: to select
channel 39.1 press the
followed by the dash
Modifies the Dynamic Volume feature
Set or select the highlighted option on
1-800-877-5032
Turns your HDTV On or Off.
Selects the desired Audio mode.
Clock Timer on page 10 for details.)
3
and
– – 1
, and
Mute or restore the sound.
settings (see page 13 for details.)
Displays on-screen Help menu.
Move the on-screen cursor in the
desired direction.
Exits the on-screen menu.
9
keys,
keys.
the screen.