Advertisement
Front Panel
1
Subwoofer Connection
The buttons are located on the rear.
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b
Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby
green LED turns on.
Subwoofer Connection Manually
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function.
If the subwoofer does not make sound, try to
/
· · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume.
connect manually.
a
Press Pairing button on the rear of the wireless
Rear Panel
subwoofer.
y The green LED on the rear of wireless
subwoofer blinks quickly.
b
Turn on the main unit.
c
Pairing is completed.
y The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
(USB)
· · · · · · · · · · · · · · ·
Connect to a USB device.
from the device (ex. wireless router, microwave
PORT. IN (Portable)
· · ·
Connect to a Portable device.
oven, etc.) over 1 m to prevent wireless
interference.
OPT. IN (Optical)
· · · · · ·
Connect to an Optical device.
SJ2.AGBRLLK_SIM_ENG_0407.indd 5-8
2
TV Connection
Remote control
a
Connect the sound bar to the TV using
an Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
STANDARD/BASS BLAST: Selects the sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby Digital..
Additional Device Connection
WOOFER LEVEL +/-: Adjusts the volume level of
a
Connect to the external device as follows.
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
(Set-top
Box, Player
Replacement of battery
etc.)
TV
b
Set the input source by pressing OPTICAL on
the remote control or pressing F on the unit
repeatedly.
Additional Information
Specification
Refer to the main label.
Power requirements
Refer to the main label.
Power
Networked standby : 0.5 W
consumption
(If all network ports are
activated.)
Approx.
Dimensions
660 mm x 56 mm x 99 mm
(W x H x D)
With foot
Bus Power Supply
5 V 0 500 mA
(USB)
Amplifier
(Total RMS
160 W RMS
Output power)
Design and specifications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
2017-04-25
3:37:26
Advertisement
