Table of Contents
Advertisement
PGN 128275 – Distance Log
The DST110 uses this PGN to indicate the total cumulative distance traveled through the water
since installation and the cumulative voyage distance traveled through the water since the last
reset. The distances through water are accumulated and the values are periodically stored in
memory.
Field 1: Measurement Date – This field is not used by the DST110; therefore, it transmits a
value of 0xFFFF (65,535) for this field (which represents "data not available").
2: Measurement Time – This field is not used by the DST110; therefore, it transmits a
value of 0xFFFFFFFF (4,) for this field (which represents "data not available").
3: Total Cumulative Distance – This field indicates the total distance traveled through the
water since the DST110 was installed in units of 1 m.
4: Distance Since Last Reset – This field indicates the total distance traveled through the
water since this parameter was last reset. This is most commonly reset at the
beginning of a voyage and then reflects the total distance traveled in that voyage. The
unit of measurement for this field is 1 m.
Revision 1.3
Appendix A – NMEA 2000
®
Interfacing
Page A3
Advertisement
Table of Contents
