Advertisement
ON-SCREEN MENU OPERATION
MENU NAVIGATIONAL MAP
No
All Channel Search
Yes
Digital Cable Search
No
Yes
Digital Add-on Search
No
Yes
Analog Antenna Signal
Cable
VHF/UHF
Channel Scan Memory
Delete?
Add?
Digital Caption
Font Size
Font Style
Background Color
Foreground Color
Background Opacity
Foreground Opacity
V-Guide
Off
On
Adjust
Picture/Sound
Auto
Color
Manual
Menu Language
English
Contrast
Español
Brightness
Français
Sharpness
Energy Saver
Off
Tone
Low
High
ALL Channel Search
DTV Cable or Add-On Search
IMPORTANT FACTS:
•
During All Channel Search, current Digital
and Analog channel databases are deleted
and new ones created.
•
Optional—To receive Digital Cable unscram-
bled (ClearQAM) channels, if available, you
must perform a Digital Cable Search.
However, not all cable companies provide
ClearQAM digital channels.
Channel Scan Memory
This Display
appears after
you press
ENTER.
After 3 seconds the TV screen
This Display
will display "Delete?"
appears after you
press ENTER.
V-Guide (Parental Control)
Note: This feature is designed to comply with the United
States of America's FCC V-Chip regulations.
Therefore, it may not function with broadcasts
that originate in other countries.
Use this feature to supervise the television viewing
of young children. This TV can be set to automatical-
ly block programs with content you deem as inap-
propriate for your children to view.
OPERATING TIP:
You can block portions of a TV rating by choosing one or
more of the Content ratings (D, L, S, and V). By blocking
just the L and S content ratings of TV-14, for example,
TV-14 rated programs with a D and/or V content rating
could still be viewed.
Energy (power) Saver
•
LOW – power saving level is
This
power
saving
feature
low and the backlight bright-
reduces the backlight brightness
ness level is lower than normal
level. The power saving function
•
options:
HIGH – power saving level is
high and the backlight bright-
•
OFF – the feature is off and the
ness is set to the lowest level
power consumption is normal
PROTECTING THE LCD SCREEN
The screen is likely to be damaged if it is not maintained properly. Do not
use hard objects such as hard cloth or paper. Do not use excessive pres-
sure when cleaning the LCD screen; excessive pressure can cause
permanent discoloration or dark spots. NEVER spray liquids on the screen.
HOW TO OPERATE THE MENU
NOTES:
I
Some Menu options are specific to Digital
and Analog signals. To access these
options, you must first tune the DTV to a
digital or analog channel.
I
" Not available" will be displayed on the
screen if an unavailable menu option is
selected.
1
Press the MENU key to display the Main
menu.
Use the CURSOR LM keys to highlight
2
menu item.
< >
3
Use the CURSOR
keys to select or
adjust menu item.
4
Press ENTER to activate setting, if needed.
5
When you have finished making adjust-
ments, press the EXIT key to return to nor-
mal TV viewing.
Tint
Note: For menu items that have sub menus,
follow on-screen instructions to select and
make adjustments.
Picture / Sound Manual
Adjustment
Searching for digi-
tal cable channels
will take about 10
minutes, please
be patient.
•
To add new digital channels to the existing
antenna channel database, use Digital Add-
on Search. The channels received are based
on the transmitting towers.
For more info go to www.antennaweb.org
and type in your zip code to obtain specific
tower and antenna information.
The Channel Scan Memory is a list of
active channels that you can cus-
tomize by deleting and/or adding
IMPORTANT FACTS:
channels. HINT: Use the CURSOR >
•
When a digital channel
key to select the channel number area.
is deleted, all of that
channel's sub-channels
are deleted as well.
•
Only previous deleted
digital channels can be
added
Channel Scan Memory.
•
If one digital sub-chan-
nel is added back to the
Channel Scan Memory
list, all of that channel's
sub-channels will be
added back.
After 3 seconds the TV screen
will display "Add?"
TV Rating
Movie Rating
Content Rating
LCD PANEL LAMPS
CONTAIN MERCURY.
DISPOSE OF PROPERLY.
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND
PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation (SMC) warrants this TV to be
free from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation will replace any
defective TV via exchange at the retailer. To ensure proper warranty application, keep the original-dated-sales receipt
for evidence of purchase. Return the defective TV to the retailer along with the receipt and the included accessories,
such as the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal
value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from defects
in material and workmanship under normal use and conditions. During the first 90 days under this warranty for any man-
ufacturing defect or malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television's model number and serial number when you
call. The model number and serial number are printed on a label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary
from state to state.
For your protection in the event of theft or loss of this product, please fill in the information requested below
and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.__________________ Date of Purchase ___________ Where Purchased_____________________
Serial No.__________________________________
(Located on back of unit)
Sanyo Manufacturing Corporation •
This symbol on the nameplate means the product is
Listed by Underwriters' Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty, and electrical hazards.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions for LCD DTV
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
back
to
the
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit fully into your out-
let, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched par-
ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufac-
turer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart / apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
VIEWING ANGLES (BRIGHTNESS)
BLOCKED RATINGS
(Lock symbol)
Vertical
NOTES: The picture may appear too dark when
viewed outside the normal viewing angles.
Use the Tilt feature to adjust the vertical angle for
optimum viewing.
WALL MOUNTING: VESA standard interface 100 x
100.) Note:Wall Mounting kit is not supplied.
LCD Mounting screws measurements:
M4 Diameter, Length—10mm (maximum).
Weekdays 7:30 AM – 7:00 PM Central Time
Saturday 7:30 AM – 4:00 PM Central Time
Purchase Price _______________________
AS
______
3333 Sanyo Road, Forrest City, AR 72335
"As an E
Manufacturing Corporation has deter-
mined that this product meets the
E
NERGY
efficiency."
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTE-
NANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.
15. If an outside antenna is connected to the television equipment,
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
In the U.S. Selection 810-21 of the National Electrical Code
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors, loca-
tion of antenna discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrodes.
16. An outside antenna system should not be located in the vicini-
ty of overhead power lines or other electrical light or power cir-
cuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA
GROUNDING ACCORDING
TO NATIONAL
ELECTRICAL CODE,
ANSI/NFPA 70
"Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical."
17. Wall or Ceiling Mounting—The product should be mounted to a
wall or ceiling only as recommended by the manufacturer.
18. "Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on
the apparatus."
19. When the MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.
USING THE DETACHABLE TV TILT STAND
To change the viewing angle of your TV, position your
hand on the top and hold the stand firmly, then tilt the
LCD screen forward or backward. CAUTION: Do not
position hand under the screen while tilting the TV
forward.
Horizontal
DETACHING THE TV TILT STAND
Tools Needed: Phillips screwdriver
Important Note: Place DTV face down on a padded or
cushioned surface to protect the screen and finish.
1
Remove two (2) screws from the metal bracket.
CAUTION: Hold the stand
firmly as you remove the
last screw.
2
Carefully remove the
DTV stand.
(EFFECTIVE: March 1, 2007)
® Partner, Sanyo
S
NERGY
TAR
® guidelines for energy
S
TAR
Advertisement
