Table Of Contents; Installation Instructions; Receiving; Location And Minimum Clearances - Bakers Pride EP series Operation Manual

Superdeck series electric deck ovens
Hide thumbs Also See for EP series:
Table of Contents

Advertisement

TABLE OF CONTENTS

Models Covered
Model
Elements
Per Deck
EP1(2,3)-8-3836
EP1(2,3)-8-5736
12
EB1(2,3)-8-3836

INSTALLATION INSTRUCTIONS

Receiving

Read the notice on the outside carton regarding damage
in transit. "CONCEALED DAMAGE", damage discovered
after opening the crate(s), must be reported immediately
to the carrier. The carrier will perform an inspection of
the damage and furnish forms for the consignee's claim
against the carrier. Retain all packing material- including
outer carton until the inspection has been completed.

Location And Minimum Clearances

Adequate air space must be provided for proper venting
of the controls and provisions must be made for venting
of the cooking vapors. The Oven must be installed in a
well-ventilated area and following minimum clearances
must be maintained at all times:
Ovens can be installed with "Zero" clearances (back
and sides) from combustible and non-combustible
materials.
The Ovens may be installed on combustible Flooring if
mounted on the Legs provided. Keep the area around
your oven free and clear of all combustible materials.
FLOOR MODEL ELECTRIC DECK OVEN OPERATION MANUAL
Total Kw
Phase
Per deck
8
8
1 or 3
12
1 or 3
8
8
1 or 3
1
1
GENERAL BAKING
1
1
3
3
4
5
6
6
Model
EB1(2,3)-8-5736
ER1(2,3)-12-3836
ER1(2,3)-12-5736

Installation

Place the oven and parts as close to the area of final
installation before un-crating. Your oven is packed
sitting on its back. Leave it on its back while unpacking.
The pallet may be left under oven for convenience in
further handling. Unpack carefully to avoid damage to
the oven. If concealed damage is discovered, follow the
instructions detailed in Receiving section above.
a) Legs are shipped in a separate carton complete
with mounting bolts and washers. Firmly bolt two
legs (in case of casters, the two with the brakes
must be used here) to the upper two corners
(front) of the oven as it rests on the pallet. Note:
(See Fig. 1).
b) Using sufficient help, tilt the oven forward and
lower it down so that the two front legs come to
rest on the floor. (See Fig.2)
1
Elements
Total Kw
Per Deck
Per deck
12
12
8
8
12
12
7
7
7
8
8
9
10
10
11
13
19
Phase
1 or 3
1 or 3
1 or 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents