Advertisement
8677/8678
Hi-low and back positioning is accomplished by 24-volt DC actuator units, which are activated by a hand
control (standard) or foot control (optional). Note: The controls are sealed units and should not be opened.
8675
The UMF Medical 8675 Chair is capable of positioning from an upright chair position to a horizontal position.
Positioning of the chair back is accomplished by lifting upward on back release handle to unlock and lower to
desired position, releasing hand locks position. To raise the chair back to upright position simply lift upward on
back, downward pressure will lock in place.
Chair height adjustment is accomplished by pumping downward on the foot lever to desired height, lifting
upward on foot lever locks height into position. To lower chair simply push foot lever to full down position
and hold, chair slowly returns to low position, remember to lift upward on foot lever and lock position before
allowing patient exit from chair.
UMF Medical
4
www.umfmedical.com
Advertisement
