Connecting The Bypass - Riello Multipass 10A User Manual

3.4 Connecting the BYPASS

TO UPS OUTPUT
LOAD
10A Version
N.B. The plug/outlet configurations vary depending on the versions.
1. Check that the SWITCH is in the "BYPASS" position
2. Connect the load to the output outlets (Load)
(N.B. The plug/outlet configurations vary depending on the versions)
3. Connect the UPS input to the outlet located on the BYPASS marked "TO UPS INPUT"
4. Connect the UPS input to the plug located on the BYPASS marked "TO UPS OUTPUT"
5. Connect the power cable to the plug marked "MAINS INPUT"
LOAD
Rack version: rear view
TO UPS INPUT MAINS INPUT
MAINS INPUT
TO UPS OUTPUT
LOAD
20
TO UPS INPUT TO UPS OUTPUT
TO UPS INPUT MAINS INPUT
16A Version