LINK-MI LM-AS01 Operation Manual

LINK-MI LM-AS01 Operation Manual

All to sdi scaler converter

Advertisement

ALL to SDI Scaler Converter

1. Introduction

The ALL to SDI Scaler Converter allows you to upscale Composite,VGA,DVI,HDMI
signals to high definition video of SDI formats (HD-SDI SMPTE 292M or 3G-SDI
424M/425M), then output to both ports at the same time.

2. Features

 Supports HDMI, DVI, VGA and Composite Video input signals;
 Supports two SDI output simultaneously;
Supports SDI output distance up to 100 meters (3G-SDI), or 200 meters
(HD-SDI);
Scales any input signal to the HD-SDI or 3G-SDI output signals;
Supports HDMI input timings: VGA@60 ~ SXGA@60 & 480i ~1080p@60 Hz;
Supports VGA/DVI input timings: VGA@60 ~1920×1080@60 Hz;
Supports Composite Video input timings NTSC, PAL,SECAM;
Supports Black screen signal output;

3. Package Contents

 ALL to SDI Scaler Converter
 12V/2.5A DC power adaptor
 Operation Manual

4. Specification

SDI Transmission Rates
Video Bandwidth
Input Ports
Operation Manual
2.970 Gbps, 1.485 Gbps
165 MHz
1×HDMI (Type A connector),
1pcs
1pcs
1pcs

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-AS01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LINK-MI LM-AS01

  • Page 1: Package Contents

    ALL to SDI Scaler Converter Operation Manual 1. Introduction The ALL to SDI Scaler Converter allows you to upscale Composite,VGA,DVI,HDMI signals to high definition video of SDI formats (HD-SDI SMPTE 292M or 3G-SDI 424M/425M), then output to both ports at the same time. 2.
  • Page 2: Front Panel

    1×DVI with Audio 1x VGA with Audio 1×Composite with R/L Output port 2×SDI (HD/3G-SDI), SDI Cable Distance 3G/HD/up to 100/200 meters with BELDEN 1694A cable HDMI Cable Distance Input: 10 m, 8/12-bit Input HDMI Timing Support VGA@60, SVGA@60, XGA@60, SXGA@60, WXGA@60,480i@60,576i@50, 480p@60, 576p@50, 720p@50/60, 1080i@50/60, 1080p@24/25/30/50/60;...
  • Page 3: Rear Panel

    1. INPUT BOTTONS: Press these buttons to select the input source. 2. RESOLUTION BOTTONS: Press these buttons to select the SDI output resolution. 5.2 Rear panel 1. OUTPUT: The two SDI output is where you connect the SDI monitor with SDI cable for input source display.

Table of Contents