General Rip-R-Stripper FCS16 Operator's Manual

Rip-r-stripper floor covering stripper
Hide thumbs Also See for Rip-R-Stripper FCS16:

Advertisement

OPERATOR'S MANUAL
Safety, Operation & Service Information
RIP-R-STRIPPER Floor Covering Stripper
Model:
Form:
Do not discard this manual.
Keep manual readily available for reference during operation or when servicing product.
Before operation, read and comprehend operator manual content.
Customer Service: 001 507 451 5510
Customer Service Telefax: 001 507 451 5511
Internet Address: http://www.generalequip.com
Email: general@generalequip.com
Mailing Address:
General Equipment Company, 620 Alexander Dr. S.W., P.O. Box 334, Owatonna, MN 55060, USA
EUROPEAN REPERESENTATIVE
Customer Service: (+31) 5 23 63 82 86
Internet Address: http://www.eurogate-international.com
Email: info@eurogate-international.com
Mailing Address: Eurogate International, Galilieistraat 6, 7701 SK Dedemsvaart, The Netherlands
Product covered by this manual complies with mandatory requirements of 2006/42/EC.
Copyright 2016, General Equipment Company, All rights reserved.
FCS16
GOM4240301EU, Version 1.0, Original Instructions
Note: There is no charge for Customer Service.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rip-R-Stripper FCS16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for General Rip-R-Stripper FCS16

  • Page 1 • Internet Address: http://www.generalequip.com • Email: general@generalequip.com • Mailing Address: General Equipment Company, 620 Alexander Dr. S.W., P.O. Box 334, Owatonna, MN 55060, USA EUROPEAN REPERESENTATIVE • Customer Service: (+31) 5 23 63 82 86 • Internet Address: http://www.eurogate-international.com •...
  • Page 2: Table Of Contents

    3 SAFETY INSTRUCTIONS equipment that delivers uncompromising value, service life and investment return. Because of this continuous commitment for excellence, many products bearing the General name actually set the standard by which competitive products are judged. • These safety instructions provide guidelines to promote safety When you purchased this product, you also gained access to a team of and efficiency with the RIP-R-STRIPPER.
  • Page 3 FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 Vibration Prolonged use of RIP-R-STRIPPER (or other, similar machines) exposes operator to vibrations which may produce Whitefinger Disease (Raynaud's Phenomenon). Continuous and regular users should closely monitor condition of hands and fingers. After each period of use, exercise to restore normal blood circulation.
  • Page 4: Machine Specifications

    FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 The floor covering material removal process can produce sparks, dusts OPERATING LENGTH 864 mm (34 inches) and other foreign particle contamination that can result in fire and/or TRANSPORT HEIGHT 584 mm (23 inches) explosion depending on existing jobsite conditions.
  • Page 5: Machine Set-Up

    FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 ACCESSORIES NOTE: All blades are for use in general purpose projects on both wood and cement surfaces unless otherwise designated. Part # Description Weight (in Kg) FCS16-1100 Blade, straight, 102 mm x 152 mm, dual bevel edged.
  • Page 6: Application Theory & Techniques

    FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 NOTE: DO NOT substitute different fastener for factory supplied cap screw to prevent operational problems during flooring removal. Store T-handled blade wrench in storage location provided on machine. Remove any additional adjusting/tightening wrenches BEFORE operating RIP-R-STRIPPER.
  • Page 7 Straight Beveled Cutting Edge Blade results are achieved. Experience gained over time, along with common sense, Blade removes a wide variety of VCT and linoleum tiles along with general will help minimize the amount of necessary testing. material removal from concrete and wood surfaces. Some blades feature two cutting edges.
  • Page 8: Operating Instructions

    FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 In general, for thicker adhesives (i.e.-amount used), higher shear force is Keep feet comfortable distance apart for stability – shoulder width, one required to remove and decreases floor covering removal rates. The foot in front of the other.
  • Page 9: Maintenance Instructions

    FCS16 RIP-R-STRIPPER FLOOR COVERING STRIPPER FORM GOM4240301EU, VERSION 1.0 STOPPING RIP-R-STRIPPER Turn RIP-R-STRIPPER ON/OFF switch to OFF position between each use or when moving from one major section of work surface to another. Disconnect extension cord from power source. Never leave RIP-R- STRIPPER connected to power source and unattended.
  • Page 10: Storage

    13 DECLARATION OF CONFORMITY DIFFICULTY OPERATING BACK SAVER™ BLADE CONTROL SYSTEM Possible Cause Correction We, General Equipment Company, 620 Alexander Drive SW, P.O. Box 334, Misaligned jackscrew bearing. Loosen and realign. Owatonna, MN 55060, USA declare under our sole responsibility that the Bent jackscrew.

Table of Contents