3B SCIENTIFIC PHYSICS Escola 2 Instruction Sheet

3B SCIENTIFIC ® PHYSICS
Instruction sheet
01/13 ALF
The Escola 2 multimeter conforms to the safety
requirements for electrical equipment for meas-
urement, control and laboratory use in DIN EN
61010 part 1. Safe operation of the apparatus is
guaranteed with correct handling. However,
safety is not guaranteed if the apparatus is han-
dled improperly or carelessly.
• Read this manual carefully before using the
multimeter and follow the instructions!
• Before using the meter, check the case and
test leads for any damage. In the event of
any malfunction/operational defect or visible
damage, do not use the meter. Pay particu-
lar attention to the insulation surrounding the
measurement sockets.
• The limit of the measurement range must
not be exceeded. If the values of the meas-
urand are unknown, always switch from a
Multimeter Escola 2 1006811
1. Safety instructions
1 Meter display with mirror scale
2 Slotted screw for zero calibra-
3 Adjustment knob for zero cali-
4 Measurement range dial
5 Operating mode switch
6 Safety measurement socket
7 Safety ground socket
higher measurement range to a lower one.
• Do not conduct measurements in a humid
environment. Work area, hands, shoes and
floor must be dry.
• When measuring current, turn off circuit
power before connecting the meter in the
circuit.
• Connect the common test lead before you
connect the live test lead. When you discon-
nect test leads, disconnect the live test lead
first.
• Before the case is opened, the meter has to
be switched off and the leads must be dis-
connected from the meter.
• When disposing empty batteries follow the
local regulations. Never dispose of them in
the regular household garbage.
1
tion
bration