Advertisement
StealthSwitch3 Hardware Installation- Mac
The StealthSwitch3 can be plugged into any USB port or hub on your Windows or Mac
computer.
2. Plug the USB cable into your computer's USB port or into a USB hub
Notes: The first time you plug the StealthSwitch3 into your computer the Keyboard Setup
Assistant window will open with a message that your keyboard cannot be identified. Simply
close this window by clicking on the red X at the top left and your StealthSwitch3 hardware
installation is complete.
RoboCon Software Installation- Mac
The RoboCon software was automatically installed when you installed the StealthSwitch3
software. Note: More information regarding using the RoboCon software is included in the
"Help" files
©H-Mod, Inc.
www.stealthswitch3.com
P a g e | 9
Advertisement
