Advertisement
Quick Links
Quick Start Guide
StealthSwitch3 Product Features
! Configuration Software for Windows and Mac OSX
! Fully programmable, 5-port capability allows for ultimate customization- Use up
to five switches. Each port uses industry standard 1/8" (3.5mm) diameter
connectors
! Easy, intuitive configuration
! Includes RoboCon, The Robotic Configurator for Mac, for automatic per-
application configuration
! Once programmed, no software is required
! All settings stored in switch interface
! Designed to work as a push-to-talk (PTT) USB gaming pedal with VOIP programs
such as Ventrilo, TeamSpeak, Xfire, World of Warcraft, etc. – Simply add the foot
switch of your choice
! Supports keystrokes, mouse clicks, macros, hotkeys, drag lock
! Works with virtually any MAC or PC software that supports mouse or keystroke
control
! Shift mode effectively doubles the number of switches
! Ability to save an unlimited number of configurations
! Easily move from computer to computer without software
Build your own photo booth, using StealthSwitch3 as an advanced photo booth
!
trigger
Supports all photo booth software (including Breeze Systems Software) and can
!
be used with up to five foot switches and/or arcade buttons of your choice
Free your hands and transcribe or dictate with ease, using your preferred foot
!
pedals along with the StealthSwitch 3 (works with most dictation or transcription
software including Dragon NatuallySpeaking and Dragon Dictate)
Advertisement
Summary of Contents for H-Mod StealthSwitch3
- Page 1 Quick Start Guide StealthSwitch3 Product Features ! Configuration Software for Windows and Mac OSX ! Fully programmable, 5-port capability allows for ultimate customization- Use up to five switches. Each port uses industry standard 1/8” (3.5mm) diameter connectors ! Easy, intuitive configuration ! Includes RoboCon, The Robotic Configurator for Mac, for automatic per- application configuration ! Once programmed, no software is required ! All settings stored in switch interface ! Designed to work as a push-to-talk (PTT) USB gaming pedal with VOIP programs such as Ventrilo, TeamSpeak, Xfire, World of Warcraft, etc. – Simply add the foot switch of your choice ! Supports keystrokes, mouse clicks, macros, hotkeys, drag lock ! Works with virtually any MAC or PC software that supports mouse or keystroke control ! Shift mode effectively doubles the number of switches ! Ability to save an unlimited number of configurations ! Easily move from computer to computer without software Build your own photo booth, using StealthSwitch3 as an advanced photo booth trigger Supports all photo booth software (including Breeze Systems Software) and can be used with up to five foot switches and/or arcade buttons of your choice Free your hands and transcribe or dictate with ease, using your preferred foot pedals along with the StealthSwitch 3 (works with most dictation or transcription software including Dragon NatuallySpeaking and Dragon Dictate)
- Page 2 StealthSwitch3 Software Installation- Windows Note: Setup StealthSwitch3 software before you install hardware Installation – Windows 1. Visit www.stealthswitch3.com/support/downloads to download your software 2. Click on “Download StealthSwitch3 Software for Windows” to begin download 3. Double click your file to unzip it (**NOTE** StealthSwitch II and StealthSwitch3 software is identical) 4. User Account Control will prompt you, with “Do you want to allow the following program from an unknown publisher to make changes to this computer” click “yes” 5. Follow the installer instructions to complete your install 6. Your software will be fully installed when you receive the following message 7. Click “finish” 8. If you are running Windows XP, you are now ready to plug in your StealthSwitch3 hardware (See StealthSwitch3 Hardware Installation below). If you are running Vista, Windows 7, Windows 8, or Windows 10 follow the steps below: a. Search for your StealthSwitch II Configurator software b. Right click on SSII Configurator software and “Pin to Taskbar” (You will now see the SS icon in your taskbar) ©H-Mod, Inc. www.stealthswitch3.com P a g e | 2...
- Page 3 Right click on SS II Configurator shortcut in taskbar, click on “Properties” d. Once in Properties, click the “Compatibility” tab e. Check “Run as Administrator” f. Click “Apply” g. Click “Ok” (see below) 9. For a complete programming guide, click on the “Help” file at the top of the Configurator program ©H-Mod, Inc. www.stealthswitch3.com P a g e | 3...
- Page 4 StealthSwitch3 Hardware Installation- Windows The StealthSwitch3 can be plugged into any USB port or hub on your Windows or Mac computer. 1. Plug the USB cable into your computer’s USB port or into a USB hub Notes: The first time you plug the StealthSwitch3 into your computer, the “Found New Hardware” window will open in the system tray. You will receive a message when the installation is complete that says “Your new hardware is installed and ready to use”. ©H-Mod, Inc. www.stealthswitch3.com P a g e | 4...
- Page 5 Programming for Windows 1. Open the StealthSwitch3 Configurator software 2. The following message will come up: “Do you want to allow the following program from an unknown publisher to make changes to this computer?” Click “yes” 3. Click on each switch that you want to program and either press the key on the keyboard or right click and select from the list (see below). ©H-Mod, Inc. www.stealthswitch3.com P a g e | 5...
- Page 6 4. Click on the “Program” button to send the program to the StealthSwitch3 5. Once you click “program” you will receive a message that reads, “Device successfully programmed” 6. NOTE: If you receive a message that says “Failed to Program Device” follow these instructions: a. You can reboot your computer or unplug the StealthSwitch3, wait 15 seconds, plug back in and then click “program” again. You will need to repeat this driver install procedure if you plug your device into a different USB port. Notes: • After programming, the software is no longer required and all settings are stored in the SS3 hardware. It can even be unplugged and moved to another computer and retain the programming. • Click on “Help” for more features and information. StealthSwitch3 Software Installation- Mac 1. Visit www.stealthswitch3.com/support/downloads to download your software 2. Click on “Download StealthSwitch3 Software for Mac” to begin download. 3. Unzip your file (**NOTE** StealthSwitch II and StealthSwitch3 software is identical) ©H-Mod, Inc. www.stealthswitch3.com P a g e | 6...
- Page 7 4. If you see the following message: a. Click “OK” and continue b. In your “Downloads” folder, hold down Control + Click on “StealthSwitch II Installer.mpkg” 5. You will see the following message: a. Click “Open” (Note: This will allow you to open your program in the future as well) 6. Follow the installer instructions to complete your install (Note: You can accept all of the defaults) ©H-Mod, Inc. www.stealthswitch3.com P a g e | 7...
- Page 8 7. You should see this message when you are done: 8. Click “Close” (Note: Your software is now installed in your “applications” folder) 9. You are now ready to plug in your StealthSwitch3 Hardware (See StealthSwitch3 Hardware Installation below) 10. NOTE: For a complete programming guide, click on the question mark on the bottom, left-hand side. ©H-Mod, Inc. www.stealthswitch3.com P a g e | 8...
- Page 9 StealthSwitch3 Hardware Installation- Mac The StealthSwitch3 can be plugged into any USB port or hub on your Windows or Mac computer. 2. Plug the USB cable into your computer’s USB port or into a USB hub Notes: The first time you plug the StealthSwitch3 into your computer the Keyboard Setup Assistant window will open with a message that your keyboard cannot be identified. Simply close this window by clicking on the red X at the top left and your StealthSwitch3 hardware installation is complete. RoboCon Software Installation- Mac The RoboCon software was automatically installed when you installed the StealthSwitch3 software. Note: More information regarding using the RoboCon software is included in the “Help” files ©H-Mod, Inc. www.stealthswitch3.com P a g e | 9...
-
Page 10: Technical Support
Programming for Mac 1. Open the StealthSwitch3 application 2. Make sure the “Product” at the top right s set to 5 switches 3. Click “Configuration – New” and choose a name 4. Click the keystroke or mouse function from the dropdown of each switch that you want to configure 5. Click on “Program Switch” to program your new configuration Notes: • After programming, the software is no longer required and all settings are stored in the switch interface. It can even be unplugged and moved to another computer. • Click on “Help” for more features and information. Technical Support hmodcorp@gmail.com www.StealthSwitch3.com ©H-Mod, Inc. www.stealthswitch3.com P a g e | 10... - Page 11 StealthSwitch3 Warranty The StealthSwitch3 is warranted to be free from defects in materials or workmanship for 1 year. Within this period, H-Mod, Inc. will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs. The warranties and remedies contained herein are exclusive and in lieu of all other warranties express or implied or statutory, including any liability arising under any warranty or merchantability or fitness for a particular purpose, statutory or otherwise. In no event shall H-Mod, Inc.’s liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. This warranty gives you specific legal rights, which may vary from state to state. H-Mod, Inc. retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. Such remedy shall be your sole and exclusive remedy for any breach of warranty. hmodcorp@gmail.com To obtain warranty service, email H-Mod, Inc. at for shipping instructions and an RMA tracking number. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Tested to comply with FCC standards. For home and office use. ©2017 H-Mod, Inc. All rights reserved. StealthSwitch 3™, the StealthSwitch 3™ logo, and other StealthSwitch 3™ marks are owned by H-Mod, Inc. and may be registered. All other trademarks are the property of their respective owners. H-Mod, Inc. assumes no responsibility for any errors that may appear in the manual. Information contained herein is subject to change without notice. ©H-Mod, Inc. www.stealthswitch3.com P a g e | 11...