Advertisement
StealthSwitch3 Software Installation- Windows
Note: Setup StealthSwitch3 software before you install hardware
Installation – Windows
1. Visit www.stealthswitch3.com/support/downloads to download your software
2. Click on "Download StealthSwitch3 Software for Windows" to begin download
3. Double click your file to unzip it (**NOTE** StealthSwitch II and StealthSwitch3 software
is identical)
4. User Account Control will prompt you, with "Do you want to allow the following
program from an unknown publisher to make changes to this computer" click "yes"
5. Follow the installer instructions to complete your install
6. Your software will be fully installed when you receive the following message
7. Click "finish"
8. If you are running Windows XP, you are now ready to plug in your StealthSwitch3
hardware (See StealthSwitch3 Hardware Installation below). If you are running Vista,
Windows 7, Windows 8, or Windows 10 follow the steps below:
a. Search for your StealthSwitch II Configurator software
b. Right click on SSII Configurator software and "Pin to Taskbar" (You will now see
the SS icon in your taskbar)
©H-Mod, Inc.
www.stealthswitch3.com
P a g e | 2
Advertisement
